Download MEMS_Diag_lite 1.0 APK for Android

Name: mems_diag_lite.apk
ID: com.rovermemslite
Version: 1.0
Size: 0 Mb

MEMS_Diag_lite Screen Preview

MEMS_Diag_lite Details

MEMS_Diag is an application designed to communicate with pre-OBD Rover engine management systems (ECU). Modular Engine Management System (MEMS) was used on many cars in the 1990s built by the Rover group (models equipped with K-Series petrol engine) Currently only MEMS 1.6 and 1.9 are supported, later versions are OBD2 compliant so they're not in the scope of this project Implemented features: - Realtime engine parameters (rpm, map, ignition advance, coolant temp, inlet temp, oxygen sensor, fuel trim/correction and more...) - Retrieve and erase error codes - Scrollable view (numerical/table display) - Graph view (selectable parameters, multiple series) - Data logging, csv format (available in full version only) In order to use this software, the following components are required: - Android device (smartphone), minimum OS version 3.1+ (USB host access) - USB port - the so-called "USB OTG" cable In addition to the above, depending on the MEMS version, you also need: for MEMS 1.9: - FTDI-based (FT232) 12V K-Line interface (USB->OBD2 socket), commonly known as VAG-cable/VAG-KKL. These cables are widely available on ebay etc. Make sure it's build using the FTDI USB chip, perhaps PL2303 should also work but I haven't been able to test it. Avoid products based on CH340 chipset (reason being: there's one missing but crucial function not yet implemented in the driver) for MEMS 1.6: - Any USB-to-TTL converter, again, the most popular are FTDI and PL2303. Remember that MEMS 1.6 uses 5V logic (depending on the quality of the converter circuit a 3.3 V may also work) Tested ECU models/part numbers: So far the following ECU have been verified to work correctly: MKC103610 (MEMS 1.6) MKC101610 (MEMS 1.6) MKC104393 (MEMS 1.9, LandRover Freelander 1.8 Petrol 99') Free / Lite Version limitations: - Data logging disabled - Execution time limit, after 120 data samples the application quits (2 min @ default 1s refresh rate) For more info, please visit http://memsdiag.blogspot.com

What's new in MEMS_Diag_lite 1.0

- Fixed jarsigner issue (-sigalg SHA1withRSA -digestalg SHA1) - Sampling interval max value

MEMS_Diag_lite | 16 Reviewers | 2015/15/1 12:00:00 SA | Rating: 4.5